Our analysis catalog
Search directly for your analysis or browse by category to find the analysis that suits your needs
-
-
Dosage and identification of an organic body in relation to databases
GC-MS, LC-MS, FTIR (Fourier Transform Infrared) Spectroscopy
-
Dosage and identification of unknown compounds
GC-MS, NMR / RAMAN spectrometry, NGS
-
-
Nutritional Dosage for Food Labeling (INCO Regulation Type I)
HPLC, GC-MS, LC-MS
-
Nutritional Dosage for Food Labelling (INCO Regulation Type II)
HPLC, GC-MS, LC-MS
-
OECD dosage
Regulatory, Standardized
-
-
Lyophilization assay
Low temperature vacuum drying, Freeze drying
-
Near infrared spectroscopy (NIRS) assay
Near infrared spectroscopy (NIR)
-
Phenolic dosage
HPLC, Spectrophotometry
-
Dosage for compound feed
HPLC, Gravimetry, Ion exchange chromatography
-
Dosage for health claim
ICP-MS and ICP-AES/ICP-OES, LC-MS, HPLC
-
Dosage for nutritional claim
ICP-MS and ICP-AES/ICP-OES, HPLC, Ion exchange chromatography
-
Quantitative determination of crystalline compounds
X-ray diffraction (XRD)
-
Dosage on fodder
Van Soest, Gravimetry, Infrared
-
Dosage on honey
HPLC, GC-MS, Ion exchange chromatography
-
Dosage on honey, according to the international standard ISO 12824 (10HDA, lipids, proteins, humidity, acidity, sugars)
HPLC, Spectrophotometry, Titration, Refractometry
-
Turbidimetry assay
Turbidimetry
-
Chemical dosages on materials (known and unknown)
ICP-MS and ICP-AES/ICP-OESFourier Transform Infrared (FTIR) spectroscopy, GC-MS
-
Sugar/sugar dosages
HPLC
-
Enthalpy of fusion
Differential scanning calorimetry (DSC)
-
Enthalpy of mixing
Isothermal titration calorimetry (ITC)
-
Enthalpy of reaction
Isothermal titration calorimetry (ITC)
-
Enthalpy of vaporization
Differential scanning calorimetry (DSC)
-
Tensile test
Mechanical test
-
-
Compression tests
Dynamometer, Mechanical Testing, Texturometry
-
Hardness tests (Buchholz indentation test, Persoz-König hardness, Vickers, Shore A and D, etc.)
Mechanical test
-
Filling tests
Mechanical test
-
-
Extraction tests
Chromatography, HPLC, ICP-MS and ICP-AES/ICP-OES
-
Total immersion tests
Mechanical test
-
Bottle tests
These tests allow the mechanical resistance (drop, pressure, crushing), the tightness or the dimensional conformity of the bottles (glass, plastic, […]) to be tested.
-
Genetic divergence study
DNA sequencing (NGS), PCR, Molecular hybridization
-
Study of alpha and beta diversity
DNA sequencing (NGS)
-
Study of honey authenticity: C3/C4 adulteration, oligosaccharides, 1H-NMR profiling and sugar levels
This complete analysis aims to verify the authenticity of the honey by identifying possible adulterations (C3/C4 syrup), the addition of oligosaccharides or sugars […]
-
Study of biocorrosion
HPLC, LC-MS, GC-MS
-
-
Study of chemical corrosion
This study measures the rate and mechanisms of corrosion induced by aggressive chemical environments on metals or […]
-
Study of planktonic microbiological growth
This analysis follows the development of free microorganisms (not fixed in biofilm) in a liquid or solution. It is […]
-
Study of phage typing
PCR, DNA sequencing (NGS)
-
-
Study of flame propagation of vertically oriented specimens
Differential scanning calorimetry (DSC)
-
Skin sensitivity study
This in vitro or in vivo test allows the skin's sensitivity to a substance to be assessed. In accordance with the […]
-
-
Accelerated aging study
Enumeration on specific culture medium, Research on specific culture medium
-
Study of the degree of oxidation-reduction
Electrochemistry, Voltammetry
-
Study of macrobiofouling (e.g. algae, barnacles)
Microscopy, Enumeration on specific culture medium
-
Study of the polymorphism (crystalline or amorphous phase) of an active ingredient
X-ray diffraction (XRD), Differential scanning calorimetry (DSC), FTIR (Fourier Transform Infrared) spectroscopy
-
Study in microcosm
A microcosm study simulates a small ecosystem in a laboratory to observe the impact of a product, pollution or microorganism […]
-
Sensory study
This analysis aims to evaluate the organoleptic properties (taste, smell, texture, appearance) of a product via panels of experts or […]
-
Study on metallic materials: meb-edx, chemical analysis seo or icp, sdl, etc.
Scanning electron microscopy (SEM), SEO (optical emission spectrometry)
-
Study on organic materials: IRTF spectrometry, Raman spectrometry, DSC, GC/MC, etc.
FTIR (Fourier Transform Infrared) spectroscopy, NMR / RAMAN spectrometry, GC-MS
-
Taxonomic study
This analysis allows us to classify and identify biological organisms (plants, fungi, algae, microorganisms) according to their genus and species. It […]
-
Thermal study of an organic sample (glass transition, melting, crystallinity rate, etc.),
Differential scanning calorimetry (DSC), Thermogravimetry (TGA / TGA)
-
Efficacy studies
These studies make it possible to demonstrate the claimed effects of a product or active ingredient: hydration, soothing, anti-aging, tone, satiety, etc. […]
-
Shelf-life studies
Enumeration on specific culture medium, Research on specific culture medium
-
Metabolism studies
HPLC, LC-MS, LC-MS
-
Evaluation of the chemical inertness of a material (food contact)
LC-MS, ICP-MS and ICP-AES/ICP-OES, HPLC
-
Identification of matrices
FTIR (Fourier Transform Infrared) spectroscopy, Chromatography, ICP-MS and ICP-AES/ICP-OES
-
Identification of structures and crystal forms of a compound (comparison to a database)
X-ray diffraction (XRD), FTIR (Fourier Transform Infrared) spectroscopy
-
Genetic identification of natural raw materials (plants, algae, fungi, etc.)
DNA sequencing (NGS)
-
Melt flow index
Viscosimetry
-
Refractive index of liquid
Refractometry
-
-
-
Elastic limit
Mechanical test
-
Measurement of the tear initiated on a dynamometer
Mechanical test
-
Measurement of the hardness of materials (Vickers, Rockwell, Brinell, Knoop, Shore)
Scanning electron microscopy (SEM)
-
Measurement of abrasion resistance
Mechanical test
-
Grain size measurement
Granulometry, Scanning Electron Microscopy (SEM / SEM),
-
Atterberg Limit Measurement
The Atterberg limits are geotechnical tests used to define the consistency states of a soil (liquid limit, […]
-
Smoke point measurement
Differential scanning calorimetry (DSC)
-
Macroscopic and microscopic dimensional measurements on the surface and in section
Optical microscopy, Scanning electron microscopy (SEM), Profilometry
-
Specific migration
GC-MS, LC-MS, ICP-MS and ICP-AES/ICP-OES
-
Observation of the microstructure
Scanning electron microscopy (SEM), Optical microscopy, Polarization
-
Microscopic observation of the morphology of crystals, powders or materials
Optical microscopy, Scanning electron microscopy (SEM)
-
In vitro UV protection screening pack (SPF + UVA PF + raw IC)
Spectrophotometry
-
-
-
Pour point
Differential scanning calorimetry (DSC)
-
Flash point – fire point
Thermogravimetry (TGA / ATG)
-
Melting point
Differential scanning calorimetry (DSC)
-
Trouble spot
Differential scanning calorimetry (DSC)
-
Isoelectric point
Titrimetry
-
-
Qualification of aging (in climatic chamber)
Enumeration on specific culture medium, Research on specific culture medium
-
-
Realization of a hardness filiation
Mechanical test
-
Research into constituents of animal origin
PCRDNA sequencing (NGS), ELISA
-
-
Securing plant sourcing
DNA sequencing (NGS), HPLC
-
Oxidation stability of fats and oils
Rancimat, Oxipres
-
-
Melting temperature
Differential scanning calorimetry (DSC)
-
Flow time
Rheometry
-
-
Flammability test
This test determines the ability of a material or product to ignite or spread a flame. Carried out according to the […]
-
-
Hydration test
This test measures the moisturizing effect of a cosmetic product (cream, lotion, mask) on the skin. Carried out in vivo using a […]
-
-
Non-comedogenicity test
This test evaluates the ability of a cosmetic product to clog pores and cause blackheads. Conducted on volunteers […]
-
Photoallergy test
This clinical test determines whether a substance induces an allergic reaction after exposure to light. Performed on […]
-
-
3T3 NRU in vitro phototoxicity test
This protocol assesses potential phototoxicity by release of oxygen radicals in 3T3 cells. It applies to plant extracts, […]
-
Sensitivity test (DPRA and MUSST)
The DPRA (Direct Peptide Reactivity Assay) test assesses the potential allergenicity of an ingredient through its reactivity with peptides. The test […]
-
-
-
Sterility test
The sterility test verifies the absence of viable microorganisms in a cosmetic, food or technical product. Carried out in a sterile environment […]
-
-
Ecotoxicological test (microtox)
The Microtox test measures the toxicity of a sample on the bioluminescence of marine bacteria (Aliivibrio fischeri). It allows the ecotoxicity of […]
-
-
-
SVHC test, substances of very high concern
ICP-MS and ICP-AES/ICP-OES, HPLC, LC-MS
-
Fire resistance flammability tests (ts en 13501-1)
This European test classifies construction materials according to their reaction to fire (A1 to F). Carried out according to the standard […]
-
Flammability and explosiveness tests of suspended powders/dusts
This analysis measures the explosive or flammable potential of industrial dust (sugars, powders, starches, extracts). Carried out in a closed enclosure, it […]
-
-
Adapted microtox and culture tests (e.g. high hydrostatic pressures)
This service includes toxicity analyses under specific conditions: high pressure, high salinity, extreme pH, etc. It allows […]
-
-
-
-
-
-
Glass transition
Differential scanning calorimetry (DSC)
-
ORAC value for hydrophilic compounds
Spectrophotometry
-
Biodegradability validation
This service consists of evaluating the capacity of a product (cosmetic, detergent, material, additive) to be degraded by microorganisms in […]
-
-
Validation of the naturalness of a plant extract
HPLC, GC-MS, NGS
-
Validation of the naturalness of essential oils
GC-MS, GC-FID
-
Validation of permeability (water vapor, O2, CO2, N2)
This analysis measures the permeability of a material or packaging to gases (water vapor, oxygen, carbon dioxide, nitrogen). It is […]
-
Validation of the purity of a plant extract
HPLC, LC-MS, NGS
-
Compliance Check
This service consists of validating the conformity of a product or material according to specifications, a standard or a […]
-
Verification of the resistance of polymers to climatic environments (humidity, UV, solar spectrum type sun test, etc.)
ICP-MS and ICP-AES/ICP-OES, HPLC, LC-MS
-
Detailed visualization of the surface condition (plastic part) after peeling
Scanning electron microscopy (SEM)
-
Global visualization of the surface condition of a non-compliant part
Scanning electron microscopy (SEM), Binocular magnifier
Can't find your analysis?
Don't panic!
Contact us or send a special request, we will respond quickly.
